POTENCY PROFILES
Cannabinoid Profile
Cannabinoids are quantified using high-performance liquid chromatography.
Total Cannabinoids is the sum of all detected cannabinoids.
Max THC THCa is converted to THC by heat. Max THC is the maximum amount of THC that can be derived from this product. Use the following formula to find the Max THC: Max THC = THC + (THCa * 0.877)
Max CBD CBDa is converted to CBD by heat. Max CBD is the maximum amount of CBD that can be derived from this product. Use the following formula to find the Max CBD: Max CBD = CBD + (CBDa * 0.877)
Other* This represents materials other than cannabinoids in the product.
Moisture Adjusted values represent the product without moisture. This allows for the comparison of different products, regardless of their moisture content.
Terpenes Profile
Total Terpenes
Terpenes are quantified using Gas Chromatography with Mass Spectrometry.
| Guaiol | 0.46% |
| alpha-Ocimene | 0.24% |
| Linalool | 0.11% |
| para-Cymene | 0.08% |
| beta-Pinene | 0.04% |
| cis-Nerolidol | 0.04% |
| delta-3-Carene | 0.03% |
| alpha-Terpinene | 0.03% |
| D-Limonene | 0.03% |
| Camphene | 0.02% |
| Terpinolene | 0.02% |
| Geraniol | 0.02% |
| alpha-Bisabolol | 0.02% |
| alpha-Pinene | 0.01% |
| beta-Ocimene | 0.01% |
| gamma-Terpinene | 0.01% |
| Isopulegol | 0.01% |
| alpha-Humulene | 0.01% |
| trans-Nerolidol | 0.01% |
| Caryophyllene Oxide | 0.01% |
| Not detected: beta-Myrcene, Eucalyptol, beta-Caryophyllene | |
SAFETY PROFILES
Heavy Metals Screen
| Amount Detected | Limit of Detection |
Limit of Quantification |
|
|---|---|---|---|
| Arsenic | BQL * | 58.4 ppb | 177.1 ppb |
| Cadmium | 118.2 ppb | 25.4 ppb | 100 ppb |
| Mercury | ND | 28.9 ppb | 100 ppb |
| Lead | ND | 29.3 ppb | 100 ppb |
Mycotoxin Screen
| Amount Detected | Limit of Detection |
Limit of Quantification |
|
|---|---|---|---|
| Aflatoxin (B1, B2, G1, G2) & Ochratoxin A | Not Detected | 20 ppb | 66 ppb |
Plant Nutrient Screen
| Amount Detected | Sufficiency Range * | Greenhouse Mother Stock Plants Sufficiency Range * | |
|---|---|---|---|
| Magnesium (Mg) | 0.59% | 0.4-0.81% | 0.25-0.46% (0.32%) |
| Phosphorus (P) | 0.79% | 0.24-0.49% | 0.31-0.44% (0.35%) |
| Sulfur (S) | 0.31% | 0.17-0.26% | 0.19-0.295% (0.24%) |
| Potassium (K) | 2.29% | 1.83-2.35% | 1.84-2.98% (2.42%) |
| Calcium (Ca) | 1.73% | 1.47-4.42% | 0.53-1.40% (0.88%) |
| Boron (B) | 23.8 ppm | 56-105 ppm | 22.6-57.3 ppm (35.9 ppm) |
| Manganese (Mn) | 156.6 ppm | 41-93 ppm | 24.3-71.9 ppm (37.2 ppm) |
| Iron (Fe) | 149.6 ppm | 100-150 ppm | 59-132 ppm (82.2 ppm) |
| Copper (Cu) | 2.7 ppm | 5-7.1 ppm | 1.83-11.4 ppm (3.46 ppm) |
| Zinc (Zn) | 61.6 ppm | 24-52 ppm | 23.2-46.2 ppm (31 ppm) |
| Molybdenum (Mo) | 0.8 ppm | 0.5-1.5 ppm | 0.53-2.36 ppm (1.29 ppm) |
Percentage data represents weight percentage of sample as received by MCR Labs. This report and all information herein shall not be reproduced except in its entirety without the expressed consent of MCR Labs. Results may vary. Results are only for the sample supplied to MCR Labs.